Blog

Your content here

Test

Posted on November 1, 2013 by Nick Turpin

Test

Aluminum Alloys: Mechanical and Physical Properties

Alloy Designation (ANSI)	Tensile Strength, ksi	Yield Strength (.2% offset), ksi	Elongation, % in 2in.	Hardness,BHN	Shear Strength, ksi	Fatigue Strength, ksi	Impact Strength, ft-lb	Young's Modulus, psi x 106	Density, lb/in3	Melting Range, °F	Specific Heat, BTU/lb °F	Coefficient of Thermal Expansion, μin/in°F	Thermal Conductivity, BTU/ft hr°F	Electrical Conductivity, %IACS	Poisson's Ratio
360.0	43.5	24.7	2.5	75	27.6	20	-	10.3	0.095	1035-1105	0.23	11.6	65.3	30	0.33
369.0	47	28	7	80	-	-	-	-	.095	1040- 1120	.29	12	-	30	-
A360.0	46	23.9	3.5	75	26.1	18	-	10.3	0.095	1035-1105	0.23	11.6	65.3	29	0.33
380.0	46	23.1	2.5	80	23.3	20	3	10.3	0.099	1000-1100	0.23	12.2	55.6	27	0.33
A380.0	47	23.1	3.5	80	26.8	20	-	10.3	0.098	1000-1100	0.23	12.1	55.6	23	0.33
383.0	45	22	3.5	75	27.1	21	3	10.3	0.099	960-1080	0.23	11.7	55.6	23	0.33
384.0	48	23.9	2.5	85	28.9	20.3	-	-	0.102	960-1080	0.23	11.6	55.6	22	-
390.0	40.6	34.8	<1	120	24.5	20.3	-	11.3	0.098	950-1200	0.23	10	77.4	27	-
B390.0	46	35	<1	120	27.7	20	-	11.8	0.098	950-1200	0.23	10	77.4	27	-
392.0	42.1	39	<1	-	25.4	-	-	-	0.098	1030-1250	0.23	11.1	81	27	-
413.0	42.9	21	2.5	80	24.7	18.9	-	10.3	0.096	1065-1080	0.23	11.3	70.1	31	0.33
A413.0	42.1	19	3.5	80	24.7	18.9	-	10.3	0.096	1065-1080	0.23	11.9	70.1	31	0.33
C443.0	33.1	14.1	9	65	21	16.7	-	10.3	0.097	065-1170	0.23	12.2	82.2	37	0.33
518.0	45	28	5	80	29.7	23.2	7	10	0.093	995-1150	0.23	13.4	55.6	24	0.33

Aluminum Alloys: Comparison

Alloy Designation (ANSI)	Resistance to Hot Cracking	Pressure Tightness	Die Filling Capacity	Anti-Soldering to the Die	Resistance to Corrosion	Machining	Polishing	Electroplating	Anodizing	Chemical Oxided Coating	Strength at Elevated Temperatures
360	1	2	3	2	2	3	3	2	3	3	1
A360.0	1	2	3	2	2	3	3	2	3	3	1
380	2	2	2	1	4	3	3	1	3	4	3
A380.0	2	2	2	1	4	3	3	1	3	4	3
383	1	2	1	2	3	2	3	1	3	4	2
384	2	2	1	2	5	3	3	2	4	5	2
390	4	4	1	2	3	5	5	3	5	5	3
B390.0	4	4	1	2	3	5	5	3	5	5	3
392	4	3	1	2	2	5	5	3	5	5	3
413	1	1	1	1	2	4	5	3	5	3	3
A413.0	1	1	1	1	2	4	5	3	5	3	3
C443.0	3	3	4	4	2	5	4	2	2	2	5
518	5	5	5	5	1	1	1	5	1	1	4

Aluminum Alloys: Composition

Alloy Designation (ANSI)	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	Sn	Pb	Each Other	Total Other	Al
360.0	9.0-10.0	2	0.6	0.35	0.4-0.6	-	0.5	0.5	-	0.15	-	-	0.25	Remainder
A360.0	9.0-10.0	1.3	0.6	0.35	0.4-0.6	-	0.5	0.5	-	0.15	-	-	0.25	Remainder
361.0	9.5-10.5	1.1	0.5	0.25	0.4-0.6	0.2-0.3	0.2-0.3	0.5	0.2	0.1	-	0.05	0.15	Remainder
369.0	11.0-12.0	1.3	0.5	0.35	0.25-0.45	0.3-0.4	0.05	1.0	-	0.1	-	0.05	0.15	Remainder
380.0	7.5-9.5	2	3.0-4.0	0.5	0.1	-	0.5	3	-	0.35	-	-	0.5	Remainder
A380.0	7.5-9.5	1.3	3.0-4.0	0.5	0.1	-	0.5	3	-	0.35	-	-	0.5	Remainder
383.0	9.5-11.5	1.3	2.0-3.0	0.5	0.1	-	0.3	3	-	0.15	-	-	0.5	Remainder
384.0	10.5-12.0	1.3	3.0-4.5	0.5	0.1	-	0.5	3	-	0.35	-	-	0.5	Remainder
390.0	16.0-18.0	1.3	4.0-5.0	0.1	0.45-0.65	-	-	0.1	0.2	-	-	0.1	0.2	Remainder
B390.0	16.0-18.0	1.3	4.0-5.0	0.5	0.45-0.65	-	0.1	1.5	0.2	-	-	0.1	0.2	Remainder
392.0	18.0-20.0	1.5	0.4-0.8	0.2-0.6	0.8-1.2	-	0.5	0.5	0.2	0.3	-	0.15	0.5	Remainder
413.0	11.0-13.0	2	1.0	0.35	0.1	-	0.5	0.5	-	0.15	-	-	0.25	Remainder
A413.0	11.0-13.0	1.3	1.0	0.35	0.1	-	0.5	0.5	-	0.15	-	-	0.25	Remainder
C443.0	4.5-6.0	2	0.6	0.35	0.1	-	0.5	0.5	-	0.15	-	-	0.25	Remainder
518.0	0.35	1.8	0.25	0.35	7.5-8.5	-	0.15	0.15	-	0.15	-	-	0.25	Remainder